Console House 10 Mode Betriebsanleitung PDF herunterladen (Seite 72)

Digital communications to a central station are generally superior to

voice communications to friends and neighbors for three reasons:

- there is always someone manning the central station

- there is virtually no chance for misinterpretation

- personnel at the central station are trained to respond.

The digital communicator will not dial out until the Dial Out Delay

has expired. If the alarm is canceled prior to the expiration of the Dial

Out Delay, no transmission will take place. If the alarm is canceled

after the Dial Out Delay has expired, all alarm trips will be

transmitted followed by a Cancel code.

The communicator may be set up to automatically send a test code to

the central station on a daily or weekly basis. This verifies proper

operation of the entire monitoring system on a periodic basis.

When the digital communicator is used, all voice dial outs will be

delayed for five minutes after the expiration of the dial out delay to

allow time for the central station to call the premises.

If a Two-Way Audio Module is being used, after the transmission of

the alarm to the central station, the operator can talk and listen to

people and sounds at the premises.

If the digital communicator is unable to successfully communicate

with the central station, the console will display a Communicator

Trouble condition.

In UL Listed Installations, the Voice Dialer is supplementary to the

Digital Dialer described above.

The voice dial-out feature of the Omni is a sophisticated system that

can notify you at the office, on vacation, on a pocket pager, or notify

your neighbor, a relative, and in some cases, local authorities.

Check with your local authorities to see what number your system

should call. Be aware that in many metropolitan areas, police and fire

departments do not allow a voice dialer to call their lines. If this is the

Voice Dialer

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 135 136

Keine Kommentare

Console House 10 Mode Betriebsanleitung Seite 72