Console House 10 Mode Betriebsanleitung PDF herunterladen (Seite 103)

display "ZONE NOT RDY". If the system is armed and a zone is open

when the Exit Delay expires, the alarm will sound.

This option will instruct Omni to execute an X-10 All On command in

the event that any type of alarm occurs.

To turn on All On For Alarm, press 1 then ' # '. To turn off All On

For Alarm, press 0 then ' # '.

If the Omni detects any troubles with itself or one of the zones

connected to it, it will display a message on the screen and beep the

console twice per second, continuously (i.e. beep beep...beep beep...).

You can silence this sound by pressing the ' * ' key. However, if the

trouble occurs again, the beeper will start beeping again.

If you do not wish to hear the beeping sound when trouble occurs, set

Beep On Trouble to No by pressing 0 then ' # '. To turn the feature

back on, press 1 then ' * ' to set it to Yes. The display will still show

the trouble indication when Beep On Trouble is set to No.

The default setting for Beep On Trouble is Yes.

To configure Miscellaneous items in the system, from the Set Up

menu, press the 6 (MISC) key.

In High Security Mode, the Master or Manager code is always

required to do the following functions:

Any Control functions

Any Temperature Control

View the Event Log

Access the system from a local phone

With High Security Mode Off, no code is required to access a local

telephone.

All On For Alarm

Beep On Trouble

Set Up

Miscellaneous

High Security

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 135 136

Keine Kommentare

Console House 10 Mode Betriebsanleitung Seite 103