Console House 10 Mode Betriebsanleitung PDF herunterladen (Seite 25)

If you have a Master code, your code is valid in any area. If you are in

Area 2, and wanted to arm the system in the Away mode, simply press

the AWAY key and enter your code. The system will automatically

arm Area 2. The security state of Area 1 will not change.

If you have a code that is only valid in Area 1, you will not be able to

disarm or arm Area 2.

If you are in Area 1 and wish to disarm the security system in Area 2,

the Omni will allow you to disarm Area 2 from the console in Area 1

if you have a Master code or a code that is valid for both areas.

From the top-level display or from the main menu, press the 2 (SEC)

key on the console keypad.

Press the 0 (OFF) key, the display will show:

DISARM

ENTER CODE: #=AREA

Press the ' # ' (AREA) key, the display will show:

AREA:

ENTER AREA 0=ALL

↓

The Area number can be entered followed by the ' # ' key, or the arrow

keys may be used to scroll through a list of areas. If the ' 0 ' key is

pressed, then all areas will be selected.

Press the 2 key then the ' # ' key. You will then be prompted to enter

your code. The display will show:

DISARM AREA 2

ENTER CODE:

If the ' 0 ' (ALL) key had been selected, the display will show:

DISARM ALL AREAS

ENTER CODE: #=AREA

Home Automation, Inc. 25

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 135 136

Keine Kommentare

Console House 10 Mode Betriebsanleitung Seite 25