Console House 10 Mode Betriebsanleitung PDF herunterladen (Seite 27)

assigned to that area (AREA 2). All status displays will show the

status of the selected area.

The top line of the display will show the name and security mode for

that area.

Use the "go to" function again to return to the area normally assigned

to that console (AREA 1). The console will automatically return to its

normal area after three minutes of inactivity at the console.

Home Automation, Inc. recommends testing your system on a weekly

basis to ensure that you are fully protected.

To test your system, you will need a partner to walk around your home

and open and close all doors, windows, etc. that are connected to the

system while you watch the console.

Procedure:

1. Close all doors and windows, allow all motion detectors to return

to normal. The display should read "SYSTEM OK".

2. Turn the security system mode to Off.

3. From the top-level display or from the main menu, press the 6 key

then the 4 key.

- The Battery reading should be over 195 - See Status \ Test

4. Press the down arrow one time.

- Loops 1 - 6 should be between 135 and 145.

5. Press the down arrow one time.

- Loops 7 - 12 should be between 135 and 145.

6. Press the down arrow one time.

- Loops 13 - 16 should be between 135 and 145.

Testing Your

System

Home Automation, Inc. 27

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 135 136

Keine Kommentare

Console House 10 Mode Betriebsanleitung Seite 27