
BURGLAR ALARM ACTIVATED
If someone enters through any zone other than an Entry-Exit zone, if
the security system is in the Night mode, or if the security system is
not turned off during the Entry Delay:
- The interior sounder is activated, which makes a loud, continuous
sound.
- The display shows the type of alarm and the zones that have been
tripped: "BURGLAR ALARM! - ZONE NAME TRIPPED"
If more than one zone is tripped, then the bottom line will show each
zone tripped for two seconds.
- The When Alarm macro is activated. Any units programmed
to come on will do so.
- The Flash For Alarm Unit Number begins to flash on and off.
- The system now waits the Outside Siren Delay. (0 - 60 seconds)
- The Outdoor Siren is activated, which makes a loud, continuous
sound.
- The system now waits the Dial Out Delay. (0 - 60 seconds)
- The in house phones are seized (disconnected) and the Omni
begins to dial out.
If you are having your system monitored by a central station, the
central station will be sent a code representing the type of alarm
(burglary) and zone involved. In most cases, the central station will
call back, requesting your password or passcode.
If you are not using central station monitoring but are using the voice
dial out capability, the system looks at the Dial Order to determine
which number to call first, and calls that number.
What Happens
When the Alarm
is Activated
16 Omni Owner's Manual
Kommentare zu diesen Handbüchern