Console House 10 Mode Betriebsanleitung PDF herunterladen (Seite 15)

The console will beep and the display will return to the top-level

display.

To Bypass or Restore a zone in another area, you must first

"go to" that area by selecting #=GOTO.

AREA:

ENTER AREA:

At this point you may enter the area number followed by the ' # ' key,

or use the down arrow key to scroll to the next area - See Area Arming

for additional information.

Entry through a door:

- If you enter your home while the system is armed in the Day or

Away modes, using your normal entry door:

- Console beeper comes on - display indicates:

" *** DISARM SYSTEM *** - PRESS OFF THEN CODE"

- Any lights or control modules programmed to come on for the

door that you used will do so.

- The system will wait the Entry Delay time.

You should go to your console (or telephone) immediately and turn the

security system off. If you wish, you may go directly to a different

security mode, rather than turning the system OFF.

If you return home and hear the alarm sounding or the outdoor lights

are flashing, Do Not Enter. Use a neighbor's phone to call for help.

# = GOTO

What To Do

When You

Come Home

Home Automation, Inc. 15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 135 136

Keine Kommentare

Console House 10 Mode Betriebsanleitung Seite 15