Console House 10 Mode Betriebsanleitung PDF herunterladen (Seite 48)

When the alarm is initiated, the console beeper will be turned on and

an alarm dial-out sequence will be initiated after the normal dial-out

delay. Both voice and digital communicator dial-outs may be used.

The voice dial-out will follow the Dial Order as specified in Set Up

Dial. The digital communicator will report the Freeze Alarm Code

to the Central Station.

Inside and outside sirens are not activated for freeze alarms (This

feature must be activated by your installer).

A Model 14A00 Outdoor Temperature Sensor is available which may

be mounted outdoors to read the outdoor temperature. The zone used

for the outdoor sensor is set up as an outdoor temperature zone type,

rather than as a programmable energy saver module zone type. When

set up this way, the corresponding auxiliary output is not dedicated to

the Model 14A00 and may be used for other purposes. Also, freeze

alarms will not be generated by the outdoor temperature.

Outdoor temperature zones have a High and Low temperature

associated with them that can be used for control purposes. An

example where the bathroom heat is turned on if the outdoor temp

goes below 60 degrees is shown in the Programming section. High

and Low temperatures are changed the same way as a PESM.

You can control appliances connected to X-10 modules (such as a

ceiling fan) using the Button feature of the Omni. For example,

the ceiling fan can be programmed to come on if the temperature goes

above the High temperature. (A programming example to set this up

is shown in the Programming section.)

High and Low setpoints for temperature zones are changed the same

way as the PESM. However, on/off control of the ceiling fan is done

from the 1 (CONTROL) menu. Use the ceiling fan's unit number to

turn it On or Off. The PESM and the ceiling fan are linked together

by a button program.

Temperature sensors can be used to signal that a temperature (in a

special room, like a greenhouse or wine cooler) has gotten too high or

too low. If the temperature in this zone goes above the High setpoint

or below the Low setpoint, the console beeper is activated (inside and

Outdoor

Temperature

Temperature Control

of Appliances

Temperature

Alarms

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 135 136

Keine Kommentare

Console House 10 Mode Betriebsanleitung Seite 48